The 380i Blog

Archive for the ‘Drywall’ Category

If you’re seriously interested in knowing about Drywall, you need to think beyond the basics. This informative article takes a closer look at things you need to know about Drywall.

Have you ever noticed that your drywall have these black spots growing? You know that this is mold and you know how ugly it is but do you know that it is important that you get it removed?

Removing the black mold from your drywall should not only be done for aesthetic purposes. You have to keep in mind that this black mold can create a very serious problem in your home, especially to your health.

Although all kinds of molds should be removed immediately, it is not quite as harmful as the black mold. If you suspect that black mold has infected your drywall, you need to get it removed immediately as drywall mold is a matter that you should take seriously. Why?

For starters, you need to remember that drywall molds or black molds are poisonous to the body. Breathing in the stuff can create a plethora of problems, which include respiratory problems, bleeding of the lungs, nausea, dizziness, headaches, and other serious health problems. This is why you should invest on eye goggles, respirator mask, and a pair of gloves before you start to attempt removing the mold from your home. Always remember that if you are going to remove black mold or drywall mold, you have to protect yourself first.

Now that we’ve covered those aspects of Drywall, let’s turn to some of the other factors that need to be considered.

You also have to keep in mind that you cannot save the spot on your drywall where the mold has thrived or grew. Why? For starters, drywalls cannot be penetrated below the surface. This means that the mold that has developed below the surface of the drywall cannot be removed. Disinfecting it alone is not enough in order for you to really kill the mold. This means that you have to cut the area out using a utility knife. After removing the area, you have to put the infected patch of the drywall in a trash bag and seal it tight.

However, before you start removing the mold, make sure that the contaminated room is sealed off. Use a plastic sheet and a duct tape to seal off the room where the mold is and you can continue on with your work.

The next step is to clean the surrounding areas where you removed the mold using a light touch of product that is specifically made for removing molds. Some people may recommend using bleach or a bleach solution but this particular product will not be able to penetrate below the surface of the drywall. So, get a solution or a product that is specifically designed to remove mold and kill fungi.

Before you start repairing the hole in your drywall, wait for it to completely dry. If it’s one thing that you don’t want to happen, it’s fixing a wet surface and getting the mold to re-grow on it again.

Lastly, if you encounter a large area that is infected with mold, you may want to try and hire a professional to get it removed and the wall should be replaced. These are the reasons why you should remove drywall mold from your home and also how to do it properly.

When word gets around about your command of Drywall facts, others who need to know about Drywall will start to actively seek you out.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Today, using screws are now very common when installing drywalls. However, in some areas, nails are still used for this kind of job. If you have drywalls in your home that was installed using nails, then you may encounter some problems with it. There will be a time where the nails may come loose and can pop through the surface. Not only that this is unattractive, but it is also dangerous as your body may get snagged on the loose nail and cause injuries.

If you inspect your home closely, you may find some popped nails around the edge of ceilings and also on external walls where temperatures can get extreme. You have to remember that extreme temperatures can have different effects on metal and the surrounding wood.

The head of the nails may get a small amount of condensation, which can lead to rust discoloring. This can cause the head of the nail to fall of entirely, which is what you don’t want to happen. This is very common on older houses and on some cases the nails may pop out if the house has settled somewhat over time.

If you think that your house has settled too much or too quickly, you have to contact a home inspector in order for you to find out what caused it. It may mean that structural repairs may be needed, which means that it will be of no use addressing to the cosmetic issues of popped nails.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

When it comes to popped nails on drywalls, you have to remember that you cannot fix it by tapping the nail back in the wood. The cause of making the hole where the nail used to be to become slightly larger than the nail cannot be fixed and the nail you tap back in will eventually move again some time later.

If you want to hold the nail securely, you can do this by simply tapping in another nail. To make sure that the new nail will go in to the wood behind, you can drive a drywall nail next to the popped nail. This will enable the new nail head to overlap the popped nail. After doing this, you have to drive the nails to a slight dimple. You can test if the nails are driven in far enough with the use of metal putty knife by dragging this tool across it. When you feel that the nail heads are dragging, drive them in a bit more.

Filling the dimple that you made is also a lot easier thanks to color changing fillers. The bright pink is a popular choice as it turns to white when it dries.

With this, you will be able to finish the job with two or three coats and a light sanding between applications will ensure a smooth finish.

As you can see, repairing popped nails on your drywall is very easy. Just follow these tips and you will be able to get your drywall looking great again and also prevent the nails from popping out again.

So now you know a little bit about Drywall. Even if you don’t know everything, you’ve done something worthwhile: you’ve expanded your knowledge.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

We have to admit the fact that we spend a lot of money in order to make the interior of our home beautiful. In fact, getting drywall installed alone can cost you hundreds of dollars not to mention the fact that you get it finished and textured, which will eventually make you spend more money. This is why water damage on drywall can be a very serious problem.

If you have a drywall that is water damaged, then there is a great chance that it happened because of leak from the pipes or also because of flooding. It can also be caused by leaks on your roof where rain water enters your home and eventually make its way to the drywall.

The good news is that drywall water damage is easy to repair. So, just how do you do it?

The first thing that you have to do is to determine where the leak is coming from. You have to remember that when fixing a water damaged drywall, you have to first fix the problem that caused it in the first place. In this case, you have to look for the source of the leak which caused the water damage on your drywall.

You have to keep in mind that nothing is more frustrating than getting the drywall fixed only to have the leak return and damage your newly fixed drywall again.

If you don’t have accurate details regarding Drywall, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

Now that you fixed the leak, the next step is to cut a hole in to the wet drywall in order to begin air circulation. This can be done with the help of a strong fan and it is also highly recommended that you use a dehumidifier in order to reduce moisture content on the air inside the room where the water damaged drywall is located.

It is very important that you should monitor the drying process closely in order for you to make sure that the drying process is complete. By not completing the drying process properly, you will end up growing mold on the wall within 24 to 48 hours. If this happens, get a mold restoration professional to help in removing the mold. It is crucial that you should not touch the mold as touching it can only lead to the fast spreading of the mold around your home.

Now, after everything is already dry, you can now replace the drywall and any studs that were water damaged. You may need to get a plywood backer if you cut a large hole in order to secure the drywall you mount to cover the hole.

Nail in the patch of water resistant drywall to the backer board and place joint compound over the joints. Allow it to dry and then sand the joint compound for a smooth finish.

After that, you can now tape the joint with the drywall tape where the drywall comes together with the existing wall. Once the edges are smooth, it’s time for you to paint the area in order to match the color to the rest of the wall.

These are basically how you can fix a water damaged drywall. By following these tips, you will be able to repair water damaged drywall in your home and also do so with a professional looking finish.

It never hurts to be well-informed with the latest on Drywall. Compare what you’ve learned here to future articles so that you can stay alert to changes in the area of Drywall.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

It’s really frustrating if water damages our drywall. Not only that it leaves ugly water stain marks on the wall but it can also cause mold to develop, which can be very dangerous to your health. Drywall molds are black molds that can cause a lot of harm on your overall well-being. In fact, it can cause respiratory illnesses, such as bleeding of the lungs and other serious health conditions.

Water damage to drywall is commonly the result of roofing and plumbing leaks. It may seem harmless but this kind of damage to your home is a project that you should take seriously and prioritize. If you are trying to spot water damage on your drywall, you can simply look for bulging, sagging, discoloration, and cracks. These things indicate water damage on your drywall.

You need to keep in mind that water can easily drip and run along interior pipes. So, it is very important that you should look for damage on both the ceilings and the walls. Also, you should keep in mind that you shouldn’t be surprised to find damage that is far away from the leak.

If you only find small cracks, the water damage can be very easy to fix. All you need to do is get a ready mixed spackling compound and apply it on the crack with a putty knife. You can also apply a strip of fiberglass mesh tape, which can strengthen the area where the putty can be applied. However, if you find a much larger damage than a simple crack, then you will be required to do more structural work.

If you find yourself confused by what you’ve read to this point, don’t despair. Everything should be crystal clear by the time you finish.

The first step in repairing large portions of water damage in your drywall is to remove all the materials that have been affected. Cut the area of the drywall where the water soaked. In fact, the drywall may already be crumbling. If not, you may need to use a jigsaw or a drywall handsaw to cut away the damaged part of the wall. Always be on the lookout for molds and mildew. If you find molds and mildew clinging on the drywall, then this part of the drywall cannot be saved and should be removed immediately. Also, all the surfaces should be thoroughly cleaned.

After removing the damaged part, you first have to let the area dry completely before you start patching in the holes. Use a high powered fan and a dehumidifier if possible to let air circulate and reduce the moisture content in the air. Allow to dry for at least 12 hours. Also, you have to make sure that the leak has been fixed and that the area where you are going to do the repairs is moisture free.

When the area is already completely dry, the next step is to replace the damaged part with a piece of drywall that is fitted and blended in to the existing wall in order for it to become unnoticeable. There are water resistant drywalls available today and this is basically the best type of drywall that you can use for repairing or replacing water damaged drywall.

For larger holes, you will need a plywood backer board in order to have a place to fasten the replacement drywall. After securing the patch, the next step is to applying fiberglass drywall tape and covered with drywall mud. After the mud has cured, the next step is to sand the joints in order to ensure a flat and smooth finish and get it ready for painting.

These are the basics of repairing a water damaged drywall. As you can see, it is relatively easy to repair water damaged drywall.

This article’s coverage of the information is as complete as it can be today. But you should always leave open the possibility that future research could uncover new facts.

About the Author
By Anders Eriksson, feel free to visit his new site for adsense publishers: Free Adsense Websites

First of all, the drywall is a popular term for pre-fabricated plaster wall panels. These things are quite easy to install but you have to keep in mind that it will also require a lot of hard work if you ever need to repair it. This is why you have to avoid the basic mistakes of drywall installation in order for you to save yourself time, money and headache of redoing the entire job.

So, here are some tips that will be able to help you install drywall properly, which will be able to help you avoid making the most common mistakes in drywall installation. With these tips, you will be able to avoid the common drywall installation mistakes, which means that you will also avoid costly repair.

One great tip when installing drywall will concern the surface in which the drywall will be installed. The walls should be flat and the framing should be straight at right angles. If there are bowed rafters or studs, it should first be planed in order to flatten them before you begin your work in installing the drywall.

To test the walls if it is flat and straight, you can stretch a piece of string across it. This will also help you determine if the studs are all on the same place. Try redoing this process if necessary in order for you to be a hundred percent sure that the studs are in the proper place.

Think about what you’ve read so far. Does it reinforce what you already know about Drywall? Or was there something completely new? What about the remaining paragraphs?

You also have to remember that cutting drywall should not involve sawing at the panel until all the sections are already separate. If you don’t follow this, you will only end up with a prematurely dull utility knife and a scratched surface underneath. You should consider drawing a line across the panel of drywall that you wish to cut. To make sure that the line is completely straight, you have to use a drywall T-square.

Then, you should score down the line just deep enough to cut through the backing paper. After this, you just life the panel and snap it right down the guide-line. To completely cut the panel, you should slice through the remaining layer of backing paper. After cutting, you have to smooth the rough edges made by the cutting.

A lot of people go overboard when applying the joint compound or mud whenever they are taping or mudding the drywall. Some people also go overboard when working their joint. Sometimes, they do it too early or too much, which is definitely a no-no in drywall installation.

Always remember that you first need to apply the tape and spread a thin layer of compound over the tape in order to embed it. Then, you should leave it to dry before scraping it slightly to level any high spots. The, you need to apply the second layer if you need to.

At first, drywall hanging may seem very simple to do. However, you will find that hanging drywall will require a process. Always keep in mind that when it comes to installing drywall properly, there are no shortcuts. You have to follow the step-by-step process in order to ensure high quality work.

Sometimes it’s tough to sort out all the details related to this subject, but I’m positive you’ll have no trouble making sense of the information presented above.

About the Author
By Anders Eriksson, feel free to visit this new site for my swedish customers: Billigt Webbhotell – from SEK 10:- per month!

We know about that green spots growing on your old sandwich bread, but did you know that you can also get fungi to grow on your drywall? If you see that black stuff growing on your drywall that looks a bit like that green stuff growing on your old or stale bread then you definitely have a big problem. This basically means that your home is providing great conditions for mold to grow.

Although these things don’t really look harmful, but you have to remember that the black fungus growing on your drywall isn’t only ugly but is also dangerous. All molds can be eliminated immediately and are not as harmful as the black mold. If you suspect that this kind of mold is lurking and growing on your walls anywhere in your home, it is in your best interest to remove it immediately as drywall molds is a very serious matter.

Once you locate where the black mold is growing and thriving, the first step is to protect yourself. The reason for this is that breathing in this stuff can be poisonous to your body. In fact, black mold can cause respiratory problems and it can even be as serious as bleeding of the lungs. It can cause headaches, nausea, dizziness and other serious health problems.

Before you start removing drywall molds, try to invest in a pair of rubber gloves, eye goggles and good pair of respirator mask. These things will prevent you from inhaling black mold.

The next step in getting rid of the black mold or drywall mold is to seal off the contaminated room. You don’t want the spores of the fungus to become airborne while you work, which can spread to other rooms. Use a plastic sheet and duct tape to seal off the room you are working in. Also, you have check the surrounding walls, ceiling and floors as it is not uncommon for fungus to spread in nearby areas.

The best time to learn about Drywall is before you’re in the thick of things. Wise readers will keep reading to earn some valuable Drywall experience while it’s still free.

The bad news is that the moldy wall cannot be saved. The reason for this is that the material cannot be penetrated below the area surface, which means that the fungus below the surface of the material or the drywall cannot be removed. Disinfecting the area will not work. This basically means that you have to cut the infected area with a utility knife. Once you cut off the infected area, the next step is to dispose of it in a sealed trash bag and remove it from your home.

The next step is to clean the surrounding areas using a product that is designed for mold removal. Use only a light touch of the product in order to avoid surface damage. You also have to avoid using bleach as it cannot penetrate below the surface of the material.

After disinfecting the material, the next step is to dry the areas thoroughly. If it’s one thing that you don’t want, it’s allowing the mold to re-grow on wet surfaces.

After you have completely dried the treated material, the next step is to get rid of all traces of the fungus. After that, you can easily patch the surface where you removed a part of the drywall.

You have to keep in mind that if a large area of your drywall is affected by mold, the best way to get it removed is by hiring a professional and have the entire wall replaced. This may seem like a costly solution but always remember that what’s at stake here is your health.

About the Author
By Anders Eriksson, feel free to visit my latest acquisition: Adsense Sites and make sure to download the free adsense sites package!

If you see black mold forming on your drywall or you see that your drywall is water damaged, then you may have leaks in your home. It can be plumbing leaks or it can also be roofing leaks. It may not seem like this is a serious problem, but you need to keep in mind that water damage on drywalls is a project that you should take seriously and also take priority on.

If you are looking for water damage on your drywall, look for the tell tale signs, such as bulging, cracks, sagging, and discoloration. You need to remember that water can easily drip and run along interior pipes in your home and it can also run from a leaky roof down to your drywall. This is why you have to look for damage on both the walls and the ceilings and you shouldn’t be surprised to find damage that is further away from the leak.

If you suspect or you are well aware of the fact of water damage in your home, you have to prioritize this kind of problem immediately. Why?

Well, wet drywall will be able to provide an ideal environment for mold and mildew to grow, which can really complicate your drywall repair project.

When you find only small cracks, the water damage can be easy to fix. All you need is a ready mixed spackling compounds which are ideal for this kind of situation. This particular compound can be easily applied with a putty knife. For that structural patch, you can use a strip of fiberglass tape. Use this on to the area where you intent on applying the putty.

Now that we’ve covered those aspects of Drywall, let’s turn to some of the other factors that need to be considered.

However, if you find a larger repair, it will require you to do a lot more structural work.

The first step in repairing large portions of water damaged drywall is to completely remove the affected area. You will need a jigsaw or a drywall handsaw for this. When removing the water damaged drywall patch, be on the lookout for molds and mildew. You need to keep in mind that drywalls that are already affected with mold or mildew cannot be saved and the surrounding areas should be thoroughly cleaned before any repairs begin.

You also need to make sure that before you start patching up your drywall, the drywall should be completely dry. Try using an industrial fan to circulate air in to the area and you may also want to use a dehumidifier. These things will ensure complete drying.

Once the area is completely dry, the next step is to get a drywall patch that you will use to replace the piece of drywall that is removed because of water damage. You will find that there are now water resistant drywalls available for sale. This is basically your best option when you are repairing water damaged drywall. For large holes, you may want to use a plywood backer for support.

After screwing or nailing the replacement patch on the hole, the joint edges of the patch should be taped using a fiberglass drywall tape and it should be covered with drywall mud. After the mud has cured, you need to sand it to smooth out the surface and paint it to get the repaired area to blend in with the rest of the wall.

These are the things that you have to remember when repairing water damaged drywall. With these tips, you can easily get your drywall repaired and you will be able to get it done with a professional look.

Of course, it’s impossible to put everything about Drywall into just one article. But you can’t deny that you’ve just added to your understanding about Drywall, and that’s time well spent.

About the Author
By Anders Eriksson, feel free to visit my latest acquisition: Adsense Sites and make sure to download the free adsense sites package!

So what is Drywall really all about? The following report includes some fascinating information about Drywall–info you can use, not just the old stuff they used to tell you.

Before you consider painting your drywall, you have to remember that this is a fairly specialized task. However, if you have the proper equipments or tools and do the necessary preparations, you will find that it can be achieved by nearly everyone.

When painting drywall, you have to know about the step-by-step process in doing it properly. If you neglect to do at least one of the processes, you will end up with a painting job that looks quite amateurish.

The first step in painting drywalls is by making sure that the weather is not too humid and it should be fairly warm. You also have to make sure that the surface or the drywall you are planning to pain is dry, free from oil and grease, and that it is completely clean.

You also have to apply 3 coats of joint compound on the drywall and the joints between the panels should be taped with fiberglass or paper mesh tape or drywall tape. By doing this, you will ensure that the joint gets surfaced over. You also have to make sure that you fill in any cracks or marks using the same method.

The best time to learn about Drywall is before you’re in the thick of things. Wise readers will keep reading to earn some valuable Drywall experience while it’s still free.

You also have to clean the walls and ceilings that you intend on painting by wiping off the dust. Do this before priming. After the prime coat has dried, the next step is to sand the surface lightly with a fine grit sandpaper. This will enable you to smooth any imperfections, and raised fibers as well as rough chips. Always keep in mind that you need to wear goggles and mask as the gypsum dust produced when sanding drywalls can be very irritating to the eyes and is known to cause breathing problems.

You should also take care in removing dust from the top of your doorway as well as in the window trims. You also have to use drop cloths in order to protect finished flooring as well as doors, windows, and other fixtures. It is highly recommended that you use a painter’s plastic to do this.

You need to keep in mind that after you taped the drywall and sanded it, you shouldn’t allow the drywall to sit too long. The sunlight can cause the drywall to yellow and fade. In fact, it can look uneven even after painting it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process.

Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color of the top coat. For the top coat, use two coatings of gloss paint, which includes eggshell and satin paint. This will leave you with a finish that is easy to wash and one that is not prone to smudges and marks. For the roof, flat paint is a good option.

Always remember that with the proper equipments and preparation, you will be able to have a professional looking finish when painting your drywall.

About the Author
By Anders Eriksson, who just launched this great product..
- Are you looking to get traffic to your website? Introducing… Free Google Traffic System!!

As a do-it-yourselfer, you usually do all the construction jobs in your home yourself. But, when it comes to hanging a drywall ceiling, you will find that you really can’t do it yourself and you will eventually seek the help of another person unless you use rented equipments, such as a drywall jack.

You have to keep in mind that drywall panels are huge, bulky, and can be very awkward to handle. If you prefer renting a drywall jack, then you will find that most home improvement centers will be able to provide you with it. The cable mechanisms on drywall jacks are not that difficult to operate and it will do a great job to hold the drywall secure as you attach it to the ceiling.

First off, you have to have the right tools and materials before you start the project. In addition to drywall jacks, you will need a hammer, a drill with a screwdriver bit and you will obviously need screws and nails to fix the drywall in place. It is also important for you to measure your ceiling twice in order for you to determine how many drywall panels you need for the entire project. And, get a little extra drywall panels in case you make mistakes when attaching the drywall on to your ceiling.

The first thing that you have to do when attaching drywall ceilings is to mark the joists. You have to find the boards, which will function as the ceiling joists. You can do this by tapping along the wall studs with a hammer and at the same time, following up the wall to the ceiling. Then, you have to mark where the boards are located with a pencil. This is basically where you will need to attach the drywall on and it will make it easier for you to find them than finding them while you are screwing or nailing the drywalls on.

It seems like new information is discovered about something every day. And the topic of Drywall is no exception. Keep reading to get more fresh news about Drywall.

You also have to measure where the light fixture goes on the drywall. This is basically where you have to cut out a hole in order to accommodate the area of the ceiling.

After marking the joists, the next step is the hardest step that you will ever do when attaching drywall ceilings. This part is where you actually build a drywall ceiling. If you don’t have someone to help you out, you can always use a drywall jack to hold the drywall panel in place as you attach it on the ceiling.

When nailing the panel on to the joist, you have to make sure that you do it half an inch from the edges. This will prevent the edges to crack or split. Do this on ever corner of the drywall. After doing this, it’s time for you to remove the jack and hammer in nails at six or seven inch intervals around each panel.

Try to countersink the nails or screws on the panels as this will allow you to cover up the heads of the nails or screws with compound.

Learning how to build a drywall ceiling is not that difficult. But, it will require you to exert a lot of hard work and effort in order for you to get the job done.

About the Author
By Anders Eriksson, who just launched this great product..
- Are you looking to get traffic to your website? Introducing… Free Google Traffic System!!

Now that you’ve managed to install your drywall without any major incidents, the next thing that you have to work hard on is to put in a perfect finish. You need to consider that this is a major stumbling block for all do-it-yourselfers. It would seem next to impossible to put in a great finish for your drywall but before you start tearing your hair out, you will see that there are a lot of drywall finishing tips that you can learn which will be able to get you a great finish on your drywall.

You need to keep in mind that when finishing your drywall, it is always better to do things slowly and get it right the first time. This will save you a lot of time as well as a lot of money on costly repairs that you have to do later on if you are not patient when finishing your drywall.

The key to finishing drywalls is by practicing a lot. You have to remember that practice makes perfect and even professionals who install drywalls can make mistakes. You can follow the process of finishing drywalls but it is up to you to get the specific feel for applying the drywall mud and also to finish the drywall properly.

After you apply the drywall, the next step is to start applying the drywall tape to the joint seems. Try to use paper drywall tape on the corners and fiberglass tape for the flat seams. It will be a lot more convenient for you and it will also provide your drywall with better strength.

The information about Drywall presented here will do one of two things: either it will reinforce what you know about Drywall or it will teach you something new. Both are good outcomes.

The great thing about the fiberglass drywall tape is that it has a self sticking adhesive, which can be rolled on before the drywall mud is applied. On the other hand, you have to apply a layer of drywall mud first before you apply the drywall paper tape.

Now, after applying the fiberglass tape, you can then apply the drywall joint compound. It is highly recommended that you use at least a 5 inch drywall trowel for this application in order to give the job a professional finish. For the drywall seams, use a 12 inch cement trowel as it works better.

The 12 inch cement trowel will allow you to spread more drywall joint compound on the seams for your first application. When you apply the first layer of joint compound, let it dry first before you apply the next layer. Doing this will allow you to continue spreading the drywall mud evenly up until the seams are flat and unnoticeable

After you have applied at least 3 coats of joint compound on your drywall and after it has dried thoroughly, the next step is to sand the area until it is smooth and ready to paint.

These are basically the steps on how to finish your drywall. Always remember that you may encounter some problems on the way. But, if you are careful and you follow the mentioned tips, you can be sure that you will be able to have a professional finish on your drywall.

When word gets around about your command of Drywall facts, others who need to know about Drywall will start to actively seek you out.

About the Author
By Anders Eriksson, who just launched this great product..
- Do you want to make Your PDF files viral? Use This Secret Viral PDF Rebrander: Viral PDF