The 380i Blog

Archive for the ‘Drywall’ Category

Working on a home improvement project can be a lot of fun. However, it can also be a disaster if you don’t know what you are doing. If you don’t know anything about how to tape drywall, then it may be time for you to learn. This is one of the most important skills that you need to learn as a do it yourselfer.

First of all, you need to remember that knowing how to tape drywall is not really that hard to do. However, you have to keep in mind that there is a process to this and you shouldn’t try and cut corners with this one as you will only end up with a drywall installation job that is not at par with what you really want.

To get the job done, you obviously need to have the proper tools and techniques. You need to keep in mind that patience is really a virtue if you are on the process of taping drywall. It’s time consuming and you have to keep in mind that this involves a detailed process. In fact, taping the drywall seams can even take 3 times as long as it takes to hand the drywall.

You have to know how to tape drywall properly because without following the correct process, you will eventually get an unattractive and unprofessional finish. So, here are some instructions on how to complete this kind of project properly in order for you to have great results on the finished taping drywall project.

First, you have to have the right tools for the job. You need to understand the fact that knowing how to tape drywall and having the right tools is half the battle. Although it is possible for you to get the job done without having all the right tools, it may take a lot longer to finish the project than usual.

To tape drywall, you will need a drywall tape, joint compound, and also a good sized drywall knife. You will also need coarse and fine grit sandpaper in order for you to finish the job. Having these tools will make your project a lot easier and it will also help you produce a more professional look.

If you find yourself confused by what you’ve read to this point, don’t despair. Everything should be crystal clear by the time you finish.

Taping drywall involves knowing the entire process involved in finishing drywalls. It is important for you to understand this process because it will affect the way the finished project look.

Before applying the tape, you first need to apply drywall joint compound on each joint. You may want to apply three layers of the compound and after each layer you have to let it dry completely. Then, sand it and repeat the process three times.

After applying the last layer of joint compound, the next step is to tape the joints.

You have to tape the joints between each sheet of drywall. Then, you have to fill it with drywall compound. After applying the tape is applied, you now have to smooth the drywall compound by using a caulking knife.

Lastly, you have to dry the compound completely and you have to sand it with coarse grit sandpaper first and then the fine grit sandpaper for a smooth and polished look.

These are the proper ways on how to tape drywall. Although it may seem simple, you will find that taping drywall can take some time and patience. With these tips, you can be sure that you will be able to have the necessary knowledge that will give you a more professional look upon finishing the project.

There’s a lot to understand about Drywall. We were able to provide you with some of the facts above, but there is still plenty more to write about in subsequent articles.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

First of all, you have to keep in mind that painting drywall can be difficult. In fact, this is relatively different in painting a regular wall. It’s more specialized and you need the proper tools in order for you to have professional looking results when painting your drywall.

With the right tools, and the correct preparation, you will see that painting drywall can be achieved by almost anyone.

So, here are the proper steps in painting drywall.

First, you need to remember that painting drywall is best done in weather that is fairly warm and not too humid. You have to make sure that the surface to be painted is completely dry, clean, and it should be free from grease and oil.

You also have to keep in mind that you also have to apply at least three coats of joint compound on the drywall to be painted. Also, the joints between the drywall panels should be taped with fiberglass or paper mesh tape. This will ensure that the joint gets surfaced over. You also have to fill in any cracks or marks the same way.

You can wipe off the dust from the walls and ceilings to be painted before priming it in order for you to get a cleaner finish. But, if you really want a professional looking finish, it is highly recommended that you sand it lightly first with fine grade sandpaper. Use at least 200 grit sand papers to sand it after the prime coat has dried. If you find any imperfections, rough chips, and raised fibers on the surface, you can easily smooth it off.

Knowledge can give you a real advantage. To make sure you’re fully informed about Drywall, keep reading.

You should also remember that you have to wear protective equipments, such as goggles and mask. This will prevent gypsum dust from entering your eyes and lungs, which can be quite irritating. Dressing in protective and sensible clothing is also highly recommended.

Get a vacuum cleaner to remove dust above the doorway and window trim. A hand dust can also do this job well. Drop clothes should also be used in order to protect finished floors, windows, doors, and other fixtures. If you can, you have to get a painter’s plastic and use it to protect your flooring and other things in the room that you don’t want to get painted accidentally on.

After taping or sanding the drywall, it is important that you shouldn’t let it sit too long as sunlight can cause it to yellow and fade, which will look uneven after painting it. To combat yellowing, you have to use a high quality latex stain-killing paint before you priming it.

You have to have a roller, a brush, and spray. Brushes are great for cutting around trim and for areas like corners. Rollers work great for painting on large areas. When using a roller, you have to remember that you need to the top coat across the direction that the primer coat was applied. This will give you a greater and cleaner finish. A paint sprayer can provide you with a fast way to paint the room but it will not really give you a consistently uniformed finish compared to using a roller.

You can settle with two coats of paint and for the finishing or the top coat, use two coatings of gloss pain. This will give you a finish that is washable and one that will not be prone to smudges and marks.

Always remember that when painting your drywall, take you time to prepare and make sure that you apply the proper painting techniques. With these tips, you can be sure that you will be able to have a professional looking finish even without the help of a professional painter.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Water damaged drywall can be a very serious problem. Not only that it will make the drywall look ugly, but it can also weaken it and develop molds, which can cause serious health problems. If you have a water damaged drywall, then it is very likely that you have leaks in your home caused by flooding or piping leaks. It can also be caused by leaks on your roof.

It is very important that you get this kind of problem repaired immediately. So, just what can you do in order for you to fix water-damaged drywall?

First of all, you have to remember that you need to know where the leak is coming from. You have to make sure that you fix the leak first before you continue on in fixing the drywall. Besides, nothing can be more frustrating than having the drywall fixed only to get it water damaged again by the same leak.

You have to keep in mind that in most cases, the leak will not really come from the wall but it can come from the ceiling where the water can travel down to the damaged part of the wall. So, try to look closely for clues as to where the water came from and get the leak fixed first before you continue on with the repairs for the water damaged drywall.

If you don’t have accurate details regarding Drywall, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

After getting the leak repaired, the next step is to cut a hole in to the wet drywall. This will be able to get air to circulate inside the wall and dry it thoroughly. You can use a strong fan to help with the circulation as well as a dehumidifier in order to reduce the moisture content inside the wall and room where the water damaged drywall is located.

You have to keep in mind that it is very important for you to monitor the drying process closely. If you don’t let the drying process complete properly, then mold may begin to develop in as little as 24 to 48 hours. This can make your project more difficult to do as molds can be very difficult to remove and you will need a mold restoration professional for this kind of job.

After the wall is dry and you are absolutely sure that there are no more leaks, you can now replace the drywall and damaged studs. For larger holes, you can use plywood for backers. The next step is to place the patch of water resistant drywall on to the backer board. Then, you will need to place joint compound over the joints and allow it to dry. After it dries, you can sand the joint down for a smooth finish.

The last step is to tape the joint where the drywall comes together with the existing wall. For this, you will want to use a drywall tape. After the edges are already smooth and dry, you can now paint it in order for it to match the entire wall.

With these tips, you will be able to easily repair water damaged drywall. With patience and the proper techniques, you will be able to get rid of water damaged drywall with professional results that will make it look as if the damage wasn’t even there.

Those who only know one or two facts about Drywall can be confused by misleading information. The best way to help those who are misled is to gently correct them with the truths you’re learning here.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Have you ever wondered what exactly is up with Drywall? This informative report can give you an insight into everything you’ve ever wanted to know about Drywall.

When installing drywalls today, you will see that most people use screws. However, there are still quite a lot of people who install drywalls using nails. This can work but the problem with nails is that it is known to become loose and pop out through the surface.

Popped out nails aren’t only unpleasing to look at but it can also be dangerous, and can cause injuries. This is why you have to get popped out nails. In some cases, you will find popped nails around the edge of ceilings and also on external walls. These spots are where extreme temperatures can directly affect the wood and the metal. You have to consider the fact that extreme temperatures have different effects on wood and metal. It can cause the heads of the nails to get a small amount of condensation, which can lead to rust, which will discolor the attached spackling. It will also discolor the drywall material, which you really don’t want to happen.

The rust can even get the material on the head of the nail to fall of entirely.

There are also cases where nails may pop if the house has settled somewhat over time. If you do suspect that your home has settled too much or too quickly, it is very important for you to contact your local home inspector as this can mean structural damage to your home. If structural damage is present, it is important for you to get this fixed first before you concern yourself with the cosmetic issues of popped nails on your drywall.

Once you begin to move beyond basic background information, you begin to realize that there’s more to Drywall than you may have first thought.

You have to remember that you cannot fix a popped nail by just tapping it in back in the wood. You have to remember that the nail hole will be slightly oversize and this cannot be fixed. If you just tap the nail back in, it will move again later and get popped out again. The key to repairing popped nails on your drywall is to find a way to hold the nail securely and one of the simplest and most effective as well as popular ways to do this is by using another nail.

When driving your new nail in to the wood behind, you first need to drive a drywall nail next to the popped nail. This will get the new nail’s head overlap the top of the old one or the popped one. After doing this, you can now drive the nails to a slight dimple. You can test that the nails are already driven far enough by using a metal putty knife and dragging it across the nail. If you feel that the nail heads are dragging, you can simply drive them in a bit more.

The next step is to fill the dimple you made on the wall. You can use color changing fillers. The bright pink ones are very popular as it changes to white when it dries. Through these steps, you will be able to finish the jobs in two or three coats. You should remember to give it a slight sanding between applications.

These are the things that you should remember when repairing popped nails in your drywall. With these tips, you will be able to repair popped nails in your drywall and give a professional looking finish.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

The following article covers a topic that has recently moved to center stage–at least it seems that way. If you’ve been thinking you need to know more about it, here’s your opportunity.

First of all, drywall is basically a popular term for prefabricated plaster wall panels. These panels are usually very easy to install but you need to remember that you have to do it properly in order for you to avoid encountering problems that can lead to costly and time consuming repair.

This is why you have to know how to avoid the common mistakes that is usually associated in installing drywalls. This will help in saving yourself the headache of redoing the entire job all over again, which can be very costly and can really lead you to have a very big headache.

So, here are some tips that will enable you to avoid the common mistakes in installing drywall and save a lot of time and money on repairs.

The first tip will concern the surface on which you will install the drywall on. The walls should be flat and the framing should be straight at right angles. You also have to remember that the studs or rafters that are bowed should be planed first in order to flatten them before you work on them.

To test if the wall is flat and straight, get a piece of string and stretch it across the walls in order to make sure that the studs are all on the same plane. If it is not, plane it again and check again.

Think about what you’ve read so far. Does it reinforce what you already know about Drywall? Or was there something completely new? What about the remaining paragraphs?

When cutting the prefabricated plaster wall panels or drywalls, you will find that it is very simple to do as it doesn’t involve any sawing in order to separate it. You also don’t need to cut all the way through the drywall. Doing so will only result to a prematurely-dull utility knife and a scratched surface underneath.

The proper way to cut drywalls is by drawing a line across the panel. Make sure that the line you draw is completely straight. This can be achieved by using a drywall T-square. Then, you have to score down this line just deep enough to cut through the backing paper. After doing this, all you need to do is lift the panel and snap it right down the line or the guide. To complete the cut, you can then slice through the remaining layer of backing paper and you have to smoothen any rough edges.

You also have to keep in mind that it is very common for people to go overboard when they apply the joint compound or the mud when it comes to taping or mudding the drywall. Always keep in mind that you should never work the joint too much and at a very early stage.

A great way to do this is by first applying the tape and spread a thin layer of compound over the tape to embed it. Then, you have to leave it to dry before you scrape it slightly to level any high spots. You can apply a second layer if it is necessary or if the first layer isn’t enough.

These are the proper ways on how you can properly install drywalls on your home. By following these tips, you can be sure that you will be able to avoid costly mistakes in drywall repair.

That’s how things stand right now. Keep in mind that any subject can change over time, so be sure you keep up with the latest news.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

You should be able to find several indispensable facts about Drywall in the following paragraphs. If there’s at least one fact you didn’t know before, imagine the difference it might make.

We have to admit that we spend a lot of money decorating our homes. In fact, some people even hire interior decorators just to get a more desirable interior. And, when it comes to drywalls, people are now trying to add a little texture in order for the walls to look livelier and more beautiful. This can be very expensive if you get a professional to do it for you. If you have some extra time, you may want to try doing this project yourself as it will be able to help you save a lot of money.

First of all, you need to keep in mind that there are different ways on how you can add texture on the drywalls on your home. There are simply a lot of options to choose from.

You can choose to get a popcorn texture, which is basically a heavy texture that is usually applied on ceilings to deaden the sound. This can be very advantageous for people who have home theater systems in their home or music rooms as this will help contain the sound inside the room. The disadvantages of popcorn textures is that it is very hard to clean and it can really accumulate a lot of dirt and dust as well as the fact that it is very hard to apply paint on.

Another texture is the knockdown or skriptrowel texture. This texture is very popular as it looks like Spanish-styled stucco. This particular drywall can really bring out the beauty of your home.

The splatter or orange peel texture is another great option for your home. This texture will vary from a sequence of tiny blobs or splatter on the wall and it can also look like a large find spray that resembles an orange peel texture.

Before you start, you need the proper materials for producing the texture effects. Basically, you will need a taping knife, old paintbrushes, stencils, plastic sheeting, soft-bristled brush, and drywall joint compound.

If you don’t have accurate details regarding Drywall, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

To start, you have to take everything attached to the wall off, such as the switch plates and receptacle cover. You have to cover and remove all the furniture away from the wall that you are planning to apply texture on and you also have to protect your floor by using drop clothes.

You should also remove any wallpaper as the drywall compound can have excessive moisture, which can loosen the attached wallpaper, which would be a lot of mess and time consuming for you to clean up.

Then, begin the texture design by putting on the compound along the baseboards and on top of the walls as well as the corner. Depending on the design, the thickness will vary. If you want a rougher texture on your drywall, apply thicker compounds on the wall. You don’t need to be exact during the application as the varying thickness will be able to provide you with better effect for the texture.

You can try varying the texture by using different tools, such as wallpaper brushes and old paintbrushes. You can also use sponges to get that swirl effect or that stroke effect. If you want to be a little bit more creative, you can use your hands or fingers to create a unique and attractive design for your wall.

Just remember that when using your hands, you have to wear latex gloves.

These are the ways on how you can texture drywalls in your home. With a little bit of practice, you will be able to get a professional finish for your drywall. And, you will also be able to save hundreds or even thousands of dollars on professional fees.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Almost all of us will spend quite a considerable amount of money in order for our home to look more pleasing to the eye. In fact, there are thousands of people today who are willing to spend thousands of dollars just to give texture on the walls.

However, if you don’t want to spend a lot of money on applying texture on your drywall, you will be glad to know that texturing drywalls are quite simple or easy to do and it will enable you to have walls in your home that will look livelier and more beautiful.

By knowing how to texture drywalls, you will be able to save a lot of money as you will no longer need the help of professionals for designing your drywall in order to give it a little texture.

First off, you may want to know about the different types of texture drywalls.

The first type is the popcorn texture. This is basically a heavy texture which is usually used on ceilings and walls in order to deaden the sound. You will usually find drywall textures like this in music studios. This kind of drywall is very good at collecting dirt and dust and it will be able to hide the worst taping jobs on drywalls. The popcorn type of drywall is also very hard to paint because of its heavy texture.

Another type of drywall texture is the skriptrowel or knockdown texture. Basically, this type of texture looks like a Spanish-styled stucco.

The orange peel or splatter texture is one of the most popular types of drywall textures. The large fine spray will look like an orange peel texture or you can also try applying a sequence of tiny blobs.

It seems like new information is discovered about something every day. And the topic of Drywall is no exception. Keep reading to get more fresh news about Drywall.

When you are going to apply texture on your drywall, you will need the proper materials in order for you to get the job done properly. Basically, you will need old paintbrushes, stencils, taping knife, soft bristled brush, dry wall joint compound, and plastic sheeting.

When applying texture on the drywall, you first need to get a big bucket or pre-mixed drywall joint compound. You should also get a wide-blade taping knife or trowel that has a straight edge that is at least 8 to 12 inches wide. This will be used to spread the thin coat of compound on to the drywall.

The next step is to take away everything that is attached to the walls, such as switch plates and receptacle covers. You also have to cover and remove the furniture away from the wall which you plan on applying texture on. Then, you have to stretch out drop clothes on the floor.

You should also take out any wallpaper.

To start, begin by putting on the compound along the baseboards, corners, and top of the walls. The thickness of the compound should be an eight of an inch. If you want a rough texture, make it thicker. You need to remember that you don’t need to be exact in measurement as a diverged texture is very desirable.

You can make the texture vary in ways by using wallpaper brushes, old paintbrushes and even sponges. You can even use your fingers and hands to create different designs and texture on your drywall.

Lastly, you have to interchange the application of the compound and continue applying texture until the entire wall is covered or until you get the desirable effect.

These are the step by step instructions on how to give texture on your drywall. By following these tips, you will be able to add a bit more life to the walls on your home and also save a lot of money from hiring professional interior designers.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

When most people think of Drywall, what comes to mind is usually basic information that’s not particularly interesting or beneficial. But there’s a lot more to Drywall than just the basics.

Are you planning on putting up a wall in your home by yourself? If you are, then you have to remember that putting up drywall may seem pretty simple but the fact is, you have to have some knowledge about how to put it up properly and you have to have the necessary skills for it. In addition to that, you need to have the proper tools in order for you to put up the drywall properly and in order for you to avoid any hassles that are commonly associated in installing drywalls.

Installing drywalls is more than just nailing it in but you will find that it’s not really that difficult if you know how to do it properly.

First of all, you will find the supplies you need from your local hardware supply store. You can also find it in home improvement stores. The size of the room or the project that you are actually doing will determine how many of these tools and drywall panels that you will need. So, here are the things that you have to remember when installing drywalls.

First, you have to sand down the walls until they are smooth. You also have to keep in mind that after sanding it, you have to wipe of the dust with a dry and clean cloth.

You also have to fill any holes in the walls with plaster. You can do this by using a scraper to apply putty and you can patch after where it is necessary. If you need to apply more than a coat of plaster, then do so up until the hole is completely filled.

See how much you can learn about Drywall when you take a little time to read a well-researched article? Don’t miss out on the rest of this great information.

You need to keep in mind that you should not start installing drywalls up until you prepared the entire room. You have to fill the holes that needs filling, and you also have to sand the walls again and wash every wall down in order to remove dust. After doing all these things, it is then that you can start installing drywall in the room that you are working on.

After installing the drywall and applying the joint compound on the seams, you have to wait until it is dry. This is when you will be able to paint your drywall with any color you want.

You have to remember that before you start installing drywalls in any room of your home, you need to try to consult a professional. They will be able to tell you what you need to do in order for you to properly install drywalls and they may even give you important facts about drywall installation.

You also have to keep in mind that the cheaper method is not usually the cheap. In fact, it can even be a lot more expensive as making mistakes and doing shortcuts on installing drywall can lead to expensive repairs in the future..

Installing drywalls is not that difficult. However, you need to have the proper tools, equipments and skills in order for you to properly do it and avoid future problems that may arise from an improperly installed drywall.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

You should be able to find several indispensable facts about Drywall in the following paragraphs. If there’s at least one fact you didn’t know before, imagine the difference it might make.

We all know how unattractive blemished walls are in the home. No matter how great the wall looks with its textured finish, a hole in the drywall can eventually ruin everything. And, the bad news is that this is something that you can never really avoid. Time will come that you will have a hole somewhere in your home’s wall, which will need some patching up.

The good news about this particular problem is that it is really easy to fix and make it look like that the hole wasn’t even there in the first place

You may need to patch up a hole in your drywall that was the result of getting the piping fixed in your kitchen.

There are basically a lot of causes of holes in the drywall. So, here are some of the things that you can do to fix this type of drywall nightmare.

First off, you will need the proper materials in order for you to efficiently and professionally patch up the hole in the drywall. You will need a joint compound, a drywall tape, orange peel texture, wood screws, drywall, and also some type of scrap wood or simply some plywood.

Once you begin to move beyond basic background information, you begin to realize that there’s more to Drywall than you may have first thought.

For the tools, you will need a drill, a putty knife, a sander, and a drywall saw.

First of all, you have to take the drywall saw and cut out the debris. This will help you remove the debris that was accidentally put through the wall. Start around the edge of the damaged area and cut a square sized hole to remove the damaged drywall.

The next step is to cut a piece of wood that is about the same size of the hole you cut on the wall. Just give it a little room on the sides in order for you to put your hand in to hold the wood in place when screwing it. After doing this, you now need to place it in the hole and screw the piece of wood above the hole. Do the same for the opposite corner for both corners at the bottom of the hole.

Then, you will now be able to place a piece of drywall you cut over the wood that you recently fastened on the wall. This will set the drywall in place by screwing it on all four sides. This is the hard part.

After doing this, all you need to do is make the fix unnoticeable. To do this, just get a putty knife and dig out a little compound. Then, press the compound in to the cracks that you see around the newly fixed piece of drywall. After this, you can now get your drywall tape and cut it in to lengths that you need in order for it to cover all the four sides of the cut.

These are the basics on fixing a drywall hole. By following these steps, you will be able to fix your drywall and make it look as if nothing happened. Through these tips, you can fix any hole in your drywall and make it look as if the hole wasn’t even there in the first place.

The day will come when you can use something you read about here to have a beneficial impact. Then you’ll be glad you took the time to learn more about Drywall.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

For a lot of do-it-yourselfers, hanging drywall is considered to be almost an art. If you ask any professionals about it, they will tell you that it takes years of practice before you do a perfect job. There are so many techniques that you need to learn as installing drywalls is not as simple as hammering it in place.

So, here are some of the tips that you have to keep in mind in order for you to properly install drywall in your home.

Firstly, you need to make sure that like on any project, you have to have all the things you need before you even attempt on starting the project.

The first tip that you need to keep in mind is to have a taping knife spreader. You will also need an application knife, joint compound, joint tape, and bread pan as well as a corner taping tool. These are the basic tools you need in order for you to install drywall properly.

Whenever you are installing drywalls, you have to make sure that all of your measurements are accurate. This can take some time to practice but once you get the hang of it, you will be able to get the panels installed tightly together and install it securely. Besides, nothing is more embarrassing to have the drywall you installed to fall down on while you have guests at home.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

This is why you need to remember that the nails or screws you use should be long enough in order to keep the panels secured. The most important thing about installing drywall is that you have to feel secure about your project as they are secured on its foundation.

Another tip is that you have to strive for consistency whenever you are mixing your cement or your drywall mud. The mix should resemble an icing on cake and it should not be too stiff or too loose. To test its consistency, grab a trowel and scoop some mud with it. Hold it upside down and the cement or the mud should not fall down. And at the same time, the cement or mud should be easy to apply in to the drywall.

Instead of using paper tape, use mesh tape. Because this kind of tape is porous, it will allow the cement to seep through. This will provide you with a much smoother finish than by using paper tape, which is sometimes visually apparent.

For walls, you have to try and use more adhesives and less nails. The nails should only be used at the edge of drywall panels and for the rest of the drywall panels, use adhesives to hold it in place.

In order to hide the heads of the nails, try to hammer them down just below the surface. This will some time to perfect as you don’t want the nail heads to show but you also don’t want to hammer the nail in too hard that it can break the surface of the drywall.

These are basically the ways on how you can finish your drywall properly. By following these tips, you will be able to get a drywall finish that looks as if a professional did it. It may take some time to perfect but you will eventually get the hang of installing and finishing drywalls.

This article’s coverage of the information is as complete as it can be today. But you should always leave open the possibility that future research could uncover new facts.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO